M.2 SSD Extend Adapter Board

This M.2 NGFF/NVME Length Extend Adapter is used for extending the length of your M.2 SSD (Solid State Drive). 

With this extension bracket, you have the flexibility to position your M.2 NGFF/NVME SSD in a more convenient location within your computer case. This can help with cable management and optimize airflow for better cooling.

 

We have 5 types of M.2 SSD Extension Adapter Bracket.

1. M.2 2230 to 2242 Only SSD Extension Bracket Card Plate PCB Board Solid Hard Disk Converter for Raspberry Pi and PC Computer

Simple and practical design, easy to install solid state drives. Equipped with a screw for hassle-free setup and removal.

Suitable for use with PCIe to M.2 NVMe SSD expansion board for Raspberry Pi 5. (ZP515)

 

2. M.2 2242 to 2280 Only SSD Extension Bracket Card Plate PCB Board Solid Hard Disk Converter for Raspberry Pi and PC Computer

Simple and practical design, easy to install solid state drives. Equipped with screws for hassle-free setup and removal.

Suitable for use with PCIe to M.2 NVMe SSD expansion board for Raspberry Pi 5. (ZP517A)

 

3. M.2 2230 to 2280 Only SSD Extension Bracket Card Plate PCB Board Solid Hard Disk Converter for Raspberry Pi and PC Computer

Simple and practical design, easy to install solid state drives. Equipped with screws for hassle-free setup and removal.

Suitable for use with PCIe to M.2 NVMe SSD expansion board for Raspberry Pi 5. (ZP519)

 

4. M.2 NGFF NVMe SSD 2242 2260 2280 Length Extend Adapter Bracket Card Plate PCB Board for Raspberry Pi and PC Computer

This M.2 Extension Adapter Plate supports 2242 to 2260/2280, 2260 to 2280.

Detachable design, can be easily broken off without using other tools.

The extend adapter card can't convert NVME to SATA, also can't convert SATA to NVME.

Suitable for use with PCIe to M.2 NVMe SSD expansion board for Raspberry Pi 5. (ZP511)

 

5. M.2 NGFF NVMe SSD 2230 2242 2260 2280 Length Extend Adapter Bracket Card Plate PCB Board for Raspberry Pi and PC Computer

This M.2 Extension Adapter Plate supports 2230 to 2242/2260/2280, 2242 to 2260/2280, 2260 to 2280.

Detachable design, can be easily broken off without using other tools.

The extend adapter card can't convert NVME to SATA, also can't convert SATA to NVME.

Suitable for use with PCIe to M.2 NVMe SSD expansion board for Raspberry Pi 5. (ZP581)

 

Back to blog