ZDE ZP519 PCIe to Dual M.2 HAT Key-M NVMe SSD PCIe Peripheral Board for Raspberry Pi 5

Features:

Dual M.2 NVMe SSDs Supported: ZP519 PCIe to Dual M.2 HAT Key-M NVMe SSD expansion board supports the installation of two M.2 Key-M NVMe SSDs in 2230/2242/2260/2280 length, high-speed reading/writing; supports boot from NVMe SSD.

Compatibility: This PCIe to Dual M.2 HAT NVMe kit is only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC.

How to Power: Power the adapter directly from the PCIe FPC ribbon cable. Also, with 40pin GPIO header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.

Cooling Solution: The ZP519 shield supports the installation of official Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, providing excellent heatsink for Raspberry Pi 5 and SSD.

Practical Accessories: Comes with 2pcs M2 studs for 2230/2242/2260/2280 SSD installation, no soldering required.

Packing List:

1 x ZP519 PCIe Peripheral Board

4 x M2.5x16mm Spacers

8 x M2.5x5mm Screws

2 x M2 Studs (to fix SSD)

1 x PCIe FPC cable

Note: The Raspberry Pi 5 and M.2 NVMe SSDs are not included in the packing list.