Our adapter boards add 1GBE/2.5GBE/5GBE network ports for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
We have expansion boards with 2.5G Ethernet Port, Dual 2.5G Ethernet Ports, 5G Ethernet Port and Quad 1G Ethernet Ports.
1. ZDE ZP595 PCIe to Dual 2.5G Ethernet Network Port HAT Adapter Expansion Board 2.5GB 2.5GBE for Raspberry Pi 5
This expansion board adds two 2.5GBE network ports for Raspberry Pi 5.
Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces and then through the RTL8125 chip to achieve the expansion of dual 2.5Gbps Ethernet.
After power on, the expansion board can be automatically recognised as eth1 and eth2 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the driver of RTL8125 and then you can use it.
For ZP595 PCIe Peripheral Board with ZC506 aluminum alloy case, please refer to ZP546 (ASIN: B0F93R9D2S).
2. ZDE ZP593 PCIe to 2.5G Ethernet Network Port PCIe to M.2 Key M NVMe SSD HAT Adapter Expansion Board 2.5GB 2.5GBE for Raspberry Pi 5 Support M.2 NVMe 2230 2242 2260 2280 SSD
This expansion board adds one 2.5GBE network port and one M.2 Key-M interface for Raspberry Pi 5.
Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces and then through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet and M.2 Key-M NVME.
After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the driver of RTL8125 and then you can use it.
Support M.2 NVMe SSD for expansion and storage, compatible with M.2 KEY-M NVMe SSD in 2230/2242/2260/2280 length. Support boot from SSD, and it needs Raspberry Pi official firmware, which is at least 2024.5.13.
For ZP593 PCIe Peripheral Board with ZC506 aluminum alloy case, please refer to ZP545 (ASIN: B0F93SQ52B).
3. ZDE ZP591 PCIe to 2.5G Ethernet Network Port HAT Adapter Expansion Board 2.5GB 2.5GBE for Raspberry Pi 5
This expansion board adds one 2.5G network port for Raspberry Pi 5.
PCIe to 2.5G Ethernet Port HAT expansion board, able to achieve high-speed reading/writing. Through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet.
After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the RTL8125 driver and then you can use it.
For ZP591 PCIe Peripheral Board with ZC506 aluminum alloy case, please refer to ZP548 (ASIN: B0FQ1LSWGZ).
4. ZDE ZP596 PCIe to M.2 E Key WiFi7 6 6E 5 PCIe to 2.5G Ethernet Network Port HAT Adapter Expansion Board 2.5GB 2.5GBE for Raspberry Pi 5 Support Google TPU WiFi 7 BE200 WIFI6E AX210 MT7922 WIFI6 AX200
This expansion board adds one M.2 E-KEY interface and one 2.5GBE network port for Raspberry Pi 5.
Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces, one to achieve the expansion of M.2 E-KEY and the other to achieve the expansion of 2.5Gbps Ethernet through the RTL8125 chip.
The ZP596 is an adapter board with PCIe interface for WiFi7/6/6E/5, allowing Raspberry Pi 5 motherboard to use the latest WIFI7 module. The WIFI7 module can be inserted into the ZP596 adapter board via the M.2 E-KEY interface, which provides an opportunity for a wide range of Raspberry Pi 5 users to be able to use the latest WIFI7.
At present, Ubuntu supports wireless network cards of WIFI7 WIFI6(E) WIFI5, which can be used without installing drivers. The currently supported network cards include BE200, 8265C, AX200, AX210, MT7922. To use the WiFi7/6/6E/5 wireless network cards, the Raspberry Pi OS needs to install a driver, it depends on how familiar you are with the wifi driver and Raspberry Pi OS. (Note: The Raspberry Pi 5 and WIFI module are not included.)
After power on, the Ethernet network port of the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use ubuntu system, you need to install the RTL8125 driver and then you can use it.
For ZP596 PCIe Peripheral Board with ZC506 aluminum alloy case, please refer to ZP547 (ASIN: B0FL7MY4DD).
We also have ZP596 PCIe Peripheral Board with Magnetic Base Antenna:
ZDE ZP596C PCIe to M.2 E Key HAT Magnetic Base Antenna WiFi7 6 6E 5 PCIe to 2.5G Ethernet Network Port HAT for Raspberry Pi 5 Support Google TPU WiFi 7 BE200 WIFI6E AX210 MT7922 WIFI6 AX200
Equipped with Tri-Band RP-SMA WiFi Antenna, the 180° rotatable design provides you with the best signal. Magnetic base, 3.94ft cord length, allowing you to place it in the perfect spot.
For ZP596C PCIe Peripheral Board with ZC506 aluminum alloy case, please refer to ZP008 (ASIN: B0GWT6GBX5).
5. ZDE ZP598 PCIe to 5GbE Ethernet Network Port HAT Adapter Expansion Board 5G 5Gb 5Gbps with Aluminum Heatsink for Raspberry Pi 5
This expansion board adds one 5GbE network port for Raspberry Pi 5
Through the RTL8126 chip to achieve the expansion of 5Gbps Ethernet. Comes with aluminum heatsink for better heat dissipation effect and more stable operation performance.
After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8126 driver into the firmware.
For ZP598 PCIe Peripheral Board with ZC506 aluminum alloy case, please refer to ZP006 (ASIN: B0G4ZWBT55).
6. ZDE ZP597 PCIe to 4 Ports 1G Gigabit 1000M Ethernet Network HAT Adapter Expansion Board 1GB 1GBE for Raspberry Pi 5
The ZP597 is a 4 ports gigabit Ethernet network expansion board specially designed for Raspberry Pi 5, adding 4 1GBE network ports for Raspberry Pi 5.
You can install it on the top or bottom of Raspberry Pi 5.
Use these 4 ports as LAN port and the network port that comes with the Raspberry Pi 5 as a WAN port, so that you can build your own router or switch with the Raspberry Pi 5. The adapter board can also be used to other multi-network port applications, such as Robot, Smart Home, VOIP, Industrial Equipment and more.
PCIe to 4 Ports Gigabit Ethernet Network HAT expansion board, provides reliable data transfer, able to achieve high-speed reading/writing.
Drive-free under Raspberry Pi official OS and OpenWrt system. When use Ubuntu system, it needs to install driver.
