A Raspberry Pi 5 PoE NVMe HAT combines Power over Ethernet (IEEE 802.3af/at) and high-speed M.2 NVMe storage onto a single expansion board, letting you power the board and boot from an SSD using just one Ethernet cable.
We have developed the ZP581 PoE+ NVMe HAT, which is a PoE and M.2 NVMe plus HAT. That is, it’s a board that you can install to your Raspberry Pi 5 and can be powered entirely from your PoE switch and include support for adding an M.2 NVMe SSD all-in-one convenient kit.
Features
• PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant.
• Power Over Ethernet: providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
• Auxiliary Power Supply: Through the USB connector, connect USB-C port of the board to the USB port of Raspberry Pi 5. It can also connect to external power supply.
• Supports the installation of M.2 KEY-M NVMe SSD in 2230/2242/2280 length.
• Onboard high speed active cooling fan, better heat dissipation effect and more stable operation performance.
• Equipped with PWR LED Indicator and ACT Status LED Indicator, practical design for real-time monitoring of the working status for more stable operation.
Raspberry Pi 5 Usage
Insert ZP581 PoE M.2 HAT+ into Raspberry Pi 5 as shown below:
