Arduino UNO Q Connection Mode: Single Board Computer Mode

This mode needs a USB C multiport docking station.

We have the ZQ101 8-in-1 USB C 3.0 5Gbps Hub for Arduino UNO Q, with 1 Gigabit Ethernet port, 1 HDMI port, 2 USB-A 3.0 ports, 1 USB-C 3.0 PD port, 1 USB-C 3.0, 1 SD card slot, and 1 TF card slot.

 

Connect the USB C cable of this hub to USB C port of Arduino UNO Q.

Connect the keyboard and mouse to the 2 USB-A 3.0 ports in the hub.

The HDMI port is for output. Connect the monitor or TV to the HDMI port. We have connected the monitor’s HDMI port to this hub.

You can also insert the SD card and connect Ethernet cable.

 

Power up the hub using external PD power supply and wait for the Arduino UNO Q to boot up.

Then in the monitor, you will see the booting messages of Arduino UNO Q.

You have to provide the password to login.

And then you can start your work using Arduino UNO Q.

This single board computer mode can work individually without your laptop. It’s a standalone mode as SBC.

 

For Video Tutorial, please refer to: https://youtu.be/g1VbTs_b2to

 

Back to blog